Cire Haɗin Ƙwaƙwalwar Ƙwaƙwalwar Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararru

Cire Haɗin Ƙwaƙwalwar Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun M-Q17 Yana Ware Hoton Ƙarfin Ƙarfafa Ƙwararru

Takaitaccen Bayani:

Wuta 12.13.16mm dunƙule gidajen abinci.

Makulli da sauri-Cire haɗin huhu. Za a iya amfani da rami na tsakiya na kullewa don adana bututun iska, kuma ana iya amfani da gefen don rataye bututun.

a) Anyi daga injiniyan filastik nailan PA. Yana da dorewa kuma ba sauki ga tsufa, extruded resistant, anti-lankwasawa da lalata resistant, ba tare da karin kayan aikin, mafi dace.
Jikin kulle da maɓalli an yi su ne da injin filastik da aka ƙarfafa nailan PA, wanda ke da juriya ga lalata, tasiri da bambancin zafin jiki. Ya dace da wurare daban-daban na aiki, jikin makullin na iya zama kayan da aka keɓance da harshen wuta.

b) Babu buƙatar shigar da madaidaicin ƙimar tsaka-tsaki, ana iya keɓe ikon pneumatic tare da ƙananan farashi kuma mafi dacewa.

c) Hole a tsakiyar na'urar yana ba da damar ajiya na dindindin a kan bututun iska kuma ana iya amfani da madauki a gefe don rataye bututu da na'urar kullewa.

d) Za a iya sanye shi da makullai, diamita na ƙulli na 6.4 mm ko 7.1 mm.

Aika mana imel

Cikakken Bayani

Tags samfurin

Siffofin:

1.Babu buƙatar shigar da ƙimar tsaka-tsaki madaidaiciya, ana iya ware ikon pneumatic tare da ƙananan farashi kuma mafi dacewa.

2.Hole a tsakiyar na'urar yana ba da damar ajiya na dindindin a kan bututun iska kuma ana iya amfani da madauki a gefe don rataye bututu da na'urar kullewa.

3.Can za a iya sanye take da padlocks, kulle shackle diamita na 6.4mm ko 7.1mm sauki don amfani.

Haɗa na'urar kulle kai tsaye don ware wutar huhu, rage farashi kuma mafi dacewa.

Faɗin aikace-aikacen:Ana iya haɗa makullin tare da 6.4 / 9.5 / 12.7mm haɗin zaren waje na girman girman daban-daban don ware kayan aiki daga duk hanyoyin iska da aka matsa.

Shigar da amfani:Za'a iya amfani da rami na tsakiya na kulle don adana bututun iska, kuma ana iya amfani da gefen don rataye bututun da kullewa. Lokacin kullewa, yi amfani da makulli tare da diamita na katako na 1/4"(6.4mm) ko 9/ 32" (7.1mm).

Yana iya ware tushen iska da aka matsa, babu buƙatar shigar da bawul ɗin tsaka-tsakin kai tsaye, rage farashin kuma amfani da mafi dacewa.

Aiwatar da haɗin haɗin zaren waje don ware kayan aiki daga duk tushen iska da aka matsa, tare da ramukan da ke tsakiyar na'urar yana ba da damar adana dindindin akan bututun iska kuma ana iya amfani da madauki a gefe don rataye tiyo da na'urar kullewa.